Boat Shrink Wrap
Protect your watercraft from the elements with shrink wrap!
At Omega Shrinkwrap, we know the importance of protecting your boat during the off-season. Our specialized boat shrink-wrap services provide the peace of mind you need, knowing your boat is protected, no matter the weather.
Benefits of Boat Shrink Wrap from Omega Shrinkwrap
- Customizable shrink-wrap solutions to fit the specific needs of your boat
- High-quality shrink-wrap materials that provide superior protection against weather, wind, and debris
- Expert installation to ensure a tight and secure fit
- Access to a network of locations for convenient services
- Year-round availability to provide peace of mind no matter the weather
Contact us today to schedule your boat shrink-wrap services and protect your watercraft from the elements.
Cover installed 2009
Our Process
The nature of cover installation requires a fair day without precipitation or high winds.
First, a rigid frame constructed of 2×3 timber uprights and a 2×4 timber ridge pole is installed spanning the uprights from bow to stern. Strong nylon banding is tied from the ridge pole to suitable points on deck to stabilize the frame. A band of string is wrapped around the boat to form the bottom of the cover. The quality of the cover strongly depends on a well built frame. My frames are built with the right pitch to shed heavy snow pack. I have seen “frames” that only use on piece of wood and some shrink wrap string. I have seen these covers fail when the snow starts to fly.
The protective layer of shrink wrap film is then applied over the frame and tucked under the band that runs around the boat. The plastic is heated and shrinks tightly around the framework, locking all the elements into a stiff unit that resists flapping and abrading the hull.
Finally, vents are installed to provide proper air flow. Zipper doors are an option and can be placed to allow access as needed.
We do not recommend covering boats with lifeline stanchions in place, as the snow loads put excessive pressure on the stanchion bases and can cause damage. We are not liable in any way for damage if lifeline stanchions are left in place.
Boats painted with two part paint finishes (Awlgrip) can be damaged by cover chafing. Paint manufacturers recommend indoor storage for yachts with high quality paint finishes.